Sraith ionad meaisínithe cothrománach
Paraiméadar teicniúil
| Paraiméadar teicniúil | Aonad | SXH-TH500 | SXH-TH630 | SXH-XW1814 | SXH-TH1311 |
| Méid an tábla oibre (F * W) | mm | 500*500 | 630*630 | 800*800 | 1000*1000 |
| Uimhir an tábla oibre | Píosa | 1 nó 2 | 1 nó 2 | 1 | 1 |
| Innéacsú tábla oibre | ° | 0.001/1 | 0.001/1 | 0.001/1 | 0.001/1 |
| Sliotán T (N*W*D) | mm | 5-18*100 | 5-18*100 | 5-22*160 | 5-18*100 |
| Ualach oibre uasta | kg | 600/500*2 | 900/800*2 | 1600 | 3500 |
| Taisteal ar chlé agus ar dheis an tábla oibre (ais-X) | mm | 800 | 1100 | 1800 | 1300 |
| Taisteal tosaigh agus cúil an tábla oibre (ais-Z) | mm | 800 | 1100 | 900 | 1300 |
| Taisteal suas agus síos bosca fearsaidí (ais-Y) | mm | 800 | 800 | 1400 | 1100 |
| Fad ó lárlíne an fhearsaid go dtí dromchla an tábla oibre | mm | 125-925 | 125-1225 | 82-1318 | 50-1150 |
| Fad ó aghaidh cheann an fhearsaid go lár an tábla oibre | mm | 50-850 | 50-850 | 200-1100 | 250-1150 |
| Taper fearsaid | BT50 | BT50 | BT50 | BT50 | |
| Luas uasta an fhearsaid | rpm | 6000 | 600 | 6000 | 6000 |
| Luas gluaiseachta tapa (X/Y/Z) | m/nóim | 24/24/24 | 30/30/30 | 16/16/16 | 24/24/24 |
| Cineál iarnróid treorach/struchtúr meaisín | m/nóim | 3 iarnród líneach | 3 iarnród líneach | Iarnród 3-chrua | 3 iarnród líneach |
| Caighdeánach T | Caighdeánach T | Sleamhnán trasna | |||
| Cumas iris uirlisí | píosa | 24 | 24 | 24 | 24 |
| Meáchan uasta uirlis | kg | 25 | 25 | 25 | 25 |
| Athraigh am uirlis (uirlis go huirlis) | s | 5.5 | 5.5 | 5.5 | 5.5 |
| Cruinneas suímh | mm | ±0.005/300 | ±0.005/300 | ±0.005/300 | ±0.005/300 |
| Cruinneas in-athdhéanta | mm | ±0.003/300 | ±0.003/300 | ±0.003/300 | ±0.003/300 |
| Meáchan meaisín | T | 9/9.5 | 10.5/11 | 18 | 14.5 |
| Méid seachtrach an mheaisín (F * W * A) | mm | 5300*3300*3570 | 5900*3500*3570 | 4900*3500*3600 | 4500*6400*3600 |
Scríobh do theachtaireacht anseo agus seol chugainn í
